Cigar Box!!!

So finally almost complete with this project just gluing down the fret board then the bridge.  I should have considered the placement of bridge as it will be going through the c of Cohiba oh well live and learn!! So here they are!!!

Here is what I started to make as the whole neck shape, but then realized that the top was to wide and it just wasn't going to work.

 Here is a profile of the neck as it tapers towards the tuners!  I then popped it out then added four coats of spray lacquer.  I would lightly use steel wool in between coats until it was looking nice!!

This is where I masked out the sound hole I was gonna do a fancy one but glued the top before I did it!!!!!

Here is a shot of my notch for the neck

Tail of neck

Here I clamped down the fretboard as I trimmed and filed the fret-wire.

Now I am just waiting for the fretboard to dry should be by tonight or tomorrow for sure as I am using Titebond.  I also used Howards Feed n Wax to coat the fretboard with a nice looking oil finish.  I think once I have everything assembled I will probably be adding a coat or two or lacquer to the body as well! Hope you enjoy it! Any questions just ask I am not an expert but had fun doing it!